Rapiro Forum

Ask questions and share your thoughts about Rapiro.

This website was originally operationg as a forum, which has been converted into a static site. /
このサイトは、元々フォーラムとして運営されていたものを静的なサイトに変換したものです。

ラピロコントロール基板のD1

お世話になります。 スピーカーアンプを追加し、電源をとる際に接続をミスし、 ラピロコントロール基板のD1を壊してしまいました。 焼損していて表記が読めません。 回路図が閲覧出来なくなっているので、調べようが有りません。 お判りの方いらっしゃいましたらお教え願います。 とりあ...
5 comments posted by HRH.Racing comment from ken@ssci on 2015-03-04 19:26

Head shaking/Walking

I've got my Rapiro built, and he seems lined up and responds to the commands ok (using the default script), however if the command involv...
2 comments posted by iamnotwhoyouthink comment from iamnotwhoyouthink on 2015-03-01 22:02

Distance sensor Dead Link

Hi the link for http://www.rapiro.com/mounting-distance-sensor-on-rapiro/is dead. Can you please fix it? Thank you.
1 comments posted by sam.chen comment from ShinichiOhki on 2015-02-24 13:01

Rapiro の電力供給を ACアダプターから,エネループに変えると Rapiro の初期体制が変わるんです

初めまして.初めて投稿させていただきます. よろしくお願いいたします. http://forum.rapiro.com/thread/72/ サイトを参考にさせていただき,Bluetooth(PLanex BT-Micro4)とPS3コントローラ(色はPINK ^^*)で...
2 comments posted by Miho.N comment from llacarte on 2015-02-20 14:19

Where do i get the Switch Cable (35) and the Battery contacts (31, 32)

Hi, Where can i get the part 31,32, and 35 on http://www.rapiro.com/parts-list/? Thanks.
1 comments posted by schen414 comment from ShinichiOhki on 2015-02-20 11:39

RAPIRO HEAD MOVEMENT

After assembling and uploading the initial sketch, RAPIRO head is turning from Left to Right. For experiment i am changing the int trim[M...
2 comments posted by sp760712 comment from iamnotwhoyouthink on 2015-02-06 19:37

Rapiro Neck Part modded for Pi B+ and Pi 2 B

Hi I've modified the Rapiro Neck Part based on the instructions given in the wiki. http://wiki.rapiro.com/page/try-to-fit-bplus/ The fil...
0 comments posted by luzhuomi on 2015-02-06 18:31

Asking for some 3D printer recommendataion

Hi Guys, Which 3D printer (with price less than 1000USD) do you guys recommend to print Rapiro parts with the best effect? Regards,
0 comments posted by luzhuomi on 2015-01-30 21:35

RAPIROの目が光るだけ

同じタイトルで以前投稿さた方がいますが、最終的に解決したか不明でしたので、同じ現象ですが投稿させていただきます。 電源としては満充電したエネループを使用しています。 USBでパソコンと接続してArduino IDEのコンソールからコマンドを入力しています。 カメラモジュー...
3 comments posted by kei.ichimaru.3776.24 comment from soumura on 2015-01-27 13:02

組み立て:サーボ不良?

Switch Scienceの組み立てキットを購入しました。 最初の組み立てが終わり、電源を入れる段階でサーボの初期確度が両足+腰で時計回りに最後まで回ってしまいます。これ以上回らない状態なので、max角に達しているようです。 arduinoの初期スケッチでint trim...
2 comments posted by ogawa.records comment from ogawa.records on 2015-01-20 22:01

Arduino IDE のインスタレーション

コメントを頂き次の2つを試みました ・ 現在までの関連プログラムのアンインストール、および関連ファイルの削除を行った後再試行しました。   途中「スケッチブックの保存場所が見当たらないのでデホルトの場所に作る」との表示ののちダウンロード  は無事終了しましたが。検証は失敗。...
8 comments posted by MitsuoMizuno comment from soumura on 2015-01-16 16:35

pythonでのカメラ制御

ラズベリーパイのカメラモジュールを接続してpythonで動かそうとしたのですが no module named picamraとエラーを返されてしまいました。 sudo apt-get install python-picamera sudo apt-get update...
5 comments posted by takeo.myojin comment from llacarte on 2015-01-16 08:58

【メール転記】Arduino IDE のインストールの件

スイッチサイエンスの宗村と申します。 defect@rapiro.comにお客様からの質問メールを頂いたのですが、 他にも同様の問題を抱えている方もいらっしゃるかもしれませんのでフォーラムに転記いたします。 尚、defect@rapiro.comは不良品交換の窓口とさせて頂...
1 comments posted by soumura comment from soumura on 2015-01-15 15:43

Wonder about power supply

According to this link http://www.rapiro.com/power-supply/ There are two power supplies for Rapiro: Battery and AC adapter. 1. Can Batter...
3 comments posted by thanhnhan1807 comment from llacarte on 2015-01-13 10:08

Strange behavior of Rapiro

Testing Rapiro (equipped with Raspberry pi b+, camera and audio amplifier) he suddenly showed a strange behavior. Powering on, the servos...
0 comments posted by DetlefBraas on 2015-01-13 06:33

3D print data: an assist part to set Raspberry Type B+ in RAPIRO(Raspberry Pi Type B+向け固定具の3Dプリントデータ)

ラピロにRaspberry Pi Type B+を搭載するときに、Raspberry Pi Type B+の固定を補助するためのパーツを3Dプリンタで作ってみました。とてもシンプルなものなので、必要に応じてSTLデータの修正や造形物の加工をして利用してもらえればと思います。...
0 comments posted by HirojiHidaka on 2015-01-10 10:50

How to set an amplifier and speakers in RAPIRO(ラピロへのアンプとスピーカーの組み込み方)

ラピロの頭にアンプとスピーカーを組み込む手順をメモしておきましたので、共有致します。 I set an amplifier and speakers in RAPIRO, and I share how to: http://make-muda.weblike.jp/201...
0 comments posted by HirojiHidaka on 2015-01-10 10:06

Demo video for Rapiro + Salesforce(Rapiroとセールスフォースの連携デモビデオです)

連携デモを音声付きで作成しましたので共有させて頂きます。 Rapiroには温度計、ヒーター、カメラ、ヘリコプターが取り付けられており、セールスフォースの画面から双方向の連携を行っております。 https://www.youtube.com/watch?v=W7hu01ZCeZk
2 comments posted by aiwaya comment from ShinichiOhki on 2015-01-08 17:03

Reading Servo Position

Hello! How would I go about writing a sketch that would allow me to A. Read the servo position of every servo after manual movement, and...
0 comments posted by mgudesblat on 2014-12-11 14:20

Rapiro Sketch Annotated?

Has anyone gone through the original Rapiro sketch, and possibly annotated all of it? It would be of great help to complete beginners, su...
0 comments posted by mgudesblat on 2014-12-10 17:06