PC does not recognize the Rapiro.

After installing Arduino IDE and FTDI driver, I connected Rapiro to PC (Windows 10 Home, 1809).
However, PC does not show COM port, and shows "Unrecognized device in the USB port".
Could you tell me why the PC cannot recognize Rapiro by COM port?
I have 2 Rapiro main boards. PC does not recognize both boards.

posted by gmmsc5050 on 2019-09-14 20:17

Did you make sure that your USB cable between Rapiro and PC, that should have data line? I have had two USB cables have only power line.

If your browser could translate to English, following trouble shooting may help you.

posted by ichiro.kano2 on 2019-10-22 11:07


posted by gmmsc5050 on 2019-11-14 19:52

Read Terms of Service upon submitting. 投稿する前に利用規約をお読みください。